Mercedes Benz S Class W222 S400 HYBRID - Facts and Figures

General Value
Chassis W222
Model S400 HYBRID
Engine 3498cc
Engine Code M276DE35
Fuel Type Petrol
Production 2014
Predecessor W221
Successor -
Performance Value
Power 306 PS - 225 kW - 302 BHP
Torque 370 Nm - 273 lb/ft
Acceleration N/A
Top Speed N/A
MPG City 37.0 MPG
MPG Motorway 49.0 MPG
View All W222's

mercedes enthusiasts instagram

W222 S400 HYBRID Review

We want to find out opinions of W222 S400 HYBRID Owners. Do the figures above match your S400 HYBRID figures? Have you had any problems during ownership? Is it your Daily Driver? Would you recommened this type of S Class?

Tell Us About Your Ownership

Independent Garages


Share Your Car


S Class W222 S400 HYBRID Problems, Faults and Recalls

  • R/2015/211 - Combustion Engine May Fail To Start - Incorrect software may cause the combustion engine to non start during use. Restarting the vehicle by using the key will reset the system
  • R/2015/248 - Transmission May Lock At Low Speed - The high-voltage battery charger may not have been produced to specification which could lead to an incorrect detection of an external charging cable. This in turn can lead the request for ?P? to be activated. If the speed is less than 5 km/h the transmission would activate the park pawl function which will prevent the vehicle from driving further and could increase the risk of an incident.
  • R/2015/232 - Auto Stop/start May Shutdown Without Warning - Incorrect software may have been installed during manufacture. This may cause erratic idling when coming to a halt and the engine may shut down. Consequently the auto start/stop may not operate as intended.
  • R/2015/247 - Stop Start Engine May Not Restart - The excess length of the wiring harness to the engine control unit could result in a faulty camshaft signal. This faulty camshaft signal may lead to an unintentional cancellation of the automatic starting procedure after automatic engine stop of the automatic start/stop system. In the event of a faulty camshaft signal the engine would not restart as expected following the stop procedure but can be manually restarted immediately by engaging the transmission selector lever position ?N? or ?D? and by operating the ignition key or the start button (with keyless go). Depending on the traffic situation however an increased accident hazard could result.