Mercedes Benz CLA C117 CLA 200 CDI - Facts and Figures
|Model||CLA 200 CDI|
|Power||136 PS - 100 kW - 134 BHP|
|Torque||300 Nm - 221 lb/ft|
|MPG City||42.0 MPG|
|MPG Motorway||57.0 MPG|
C117 CLA 200 CDI Review
We want to find out opinions of C117 CLA 200 CDI Owners. Do the figures above match your CLA 200 CDI figures? Have you had any problems during ownership? Is it your Daily Driver? Would you recommened this type of CLA?Tell Us About Your Ownership
CLA C117 CLA 200 CDI Problems, Faults and Recalls
- R/2014/076 - Seat Belt Anchorate And Window Bags May Not Perform Correctly - On affected vehicles individual threaded seat belt connections may not have been tightened to the correct torque. This may affect the anchoring of seat belts window bags and ground points. The manufacturer cannot completely rule out that the affected components may not fulfil their designated functions as the seat belt anchorage points may not be fully secure. It is also possible that this may cause erroneous messages to appear in the instrument cluster
- R/2014/182 - Oil May Leak - On certain diesel engines the 'O' ring may not have been produced to the correct specification. This may allow oil to leak and contaminate the environment. If excessive oil is lost engine damage may occur.
- R/2015/099 - Possibility Of Loss Of Drive - The drive shaft and the hub of the outer joint may separate. In very rare cases it cannot be excluded that the vehicle stops. The steering and braking system remain fully available to the driver.
- R/2015/145 - Front Passenger Airbag May Not Deploy - Certain fuses in the passenger's footwell may not have been fitted correctly. This may adversely affect the instrument cluster windscreen wipers and the passenger seat occupancy recognition system. In certain conditions this may cause the passenger's air bag not to deploy in an accident.
- R/2015/208 - Engine May Fail - The camshaft could break and damage the engine due to it not being manufactured to the correct specification. If the condition occurs it will lead to a sudden loss of drive thereby increasing the risk of a collision.
- R/2015/210 - Engine May Fail - The camshaft could break and damage the engine due to it not being manufactured to the correct specification. If the condition occurs it will lead to a sudden loss of drive thereby increasing the risk of a collision.
- R/2015/259 - Risk Of Fire - The high pressure fuel lines have not been manufactured to the correct specification which over time can lead to crack formation and fuel leaking. Fuel escaping in the presence of an ignition source could lead to fire.
- R/2016/085 - Risk Of Fire - The mounting nut for the battery ground line at the body may not have been tightened correctly. If the connection is loose there could be sparks and localised heating which increases the risk of fire.
- R/2016/088 - Possible Loss Of Power Steering Assistance - The torque sensor of the electric power steering assistance may be damaged which can adversely affected the tightness of the housing and allow water ingress. The defect could lead to failure of the torque sensor and consequently shut off the steering power assistance and lead to an elevated risk of collision.